RMTCA Mac OS
RMTCA Mac OS
These key combinations apply only to Mac computers with an Intel processor, not Mac computers with Apple silicon.
To use any of these key combinations, press and hold the keys immediately after pressing the power button to turn on your Mac, or after your Mac begins to restart. Keep holding until the described behavior occurs.
- Command (⌘)-R: Start up from the built-in macOS Recovery system. Or use Option-Command-R or Shift-Option-Command-R to start up from macOS Recovery over the Internet. macOS Recovery installs different versions of macOS, depending on the key combination you use while starting up. If your Mac is using a firmware password, you're prompted to enter the password.
- Option (⌥) or Alt: Start up to Startup Manager, which allows you to choose other available startup disks or volumes. If your Mac is using a firmware password, you're prompted to enter the password.
- Option-Command-P-R:Reset NVRAM or PRAM. If your Mac is using a firmware password, it ignores this key combination or starts up from macOS Recovery.
- Shift (⇧): Start up in safe mode. Disabled when using a firmware password.
- D: Start up to the Apple Diagnostics utility. Or use Option-Dto start up to this utility over the Internet. Disabled when using a firmware password.
- N: Start up from a NetBoot server, if your Mac supports network startup volumes. To use the default boot image on the server, hold down Option-N instead. Disabled when using a firmware password.
- Command-S: Start up in single-user mode. Disabled in macOS Mojave or later, or when using a firmware password.
- T: Start up in target disk mode. Disabled when using a firmware password.
- Command-V: Start up in verbose mode. Disabled when using a firmware password.
- Eject (⏏) or F12 or mouse button or trackpad button: Eject removable media, such as an optical disc. Disabled when using a firmware password.
A downloadable game for Windows, macOS, Linux, and Android. You are a Space Mail Officer. Your duty and mission in this World are packing parcels. NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x), Catalina (10.15.x), and Big Sur (11.1) computers no longer need a CAC Enabler. Try to access the CAC enabled site you need to access now. Mac support provided by: Michael Danberry: If you have questions or suggestions for this site, contact Michael J. Apr 23, 2021 NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x), Catalina (10.15.x), and Big Sur (11.1) computers no longer need a CAC Enabler. Try to access the CAC enabled site you need to access now. Mac support provided by: Michael Danberry: If you have questions or suggestions for this site, contact Michael J.
UCEC USB 2.0 Video Capture Card Device, VHS VCR TV to DVD Converter for Mac OS X PC Windows 7 8 10. 3.9 out of 5 stars 2,315. Get it as soon as Thu, Apr 1. FREE Shipping by Amazon. More Buying Choices $25.93 (11 used & new offers).
If a key combination doesn't work
If a key combination doesn't work at startup, one of these solutions might help:
- Press and hold all keys in the combination together, not one at a time.
- Shut down your Mac. Then press the power button to turn on your Mac. Then press and hold the keys as your Mac starts up.
- Wait a few seconds before pressing the keys, to give your Mac more time to recognize the keyboard as it starts up. Some keyboards have a light that flashes briefly at startup, indicating that the keyboard is recognized and ready for use.
- If you're using a wireless keyboard, plug it into your Mac, if possible. Or use your built-in keyboard or a wired keyboard. If you're using a keyboard made for a PC, such as a keyboard with a Windows logo, try a keyboard made for Mac.
- If you're using Boot Camp to start up from Microsoft Windows, set Startup Disk preferences to start up from macOS instead. Then shut down or restart and try again.
Remember that some key combinations are disabled when your Mac is using a firmware password.
Learn more
- Keyboard shortcuts that you can use after your Mac has started up.
R-Commander is a an easy to use Graphical User Interface to run statistical applications using the R statistical engine. Much of what you can do in native command line R can be done easily in R-Commander without knowing any of the command line features in R. This reduces the time considerably it takes to perform analyses
Before you get started, make sure you have downloaded the Chrome browser and set that as your default. (http://chrome.google.com ) Safari is quirky and while it may work, it very well may not.
Installing XQuartz
The process for installing R-Commander on your Mac is pretty straightforward. If you are using MacOS 10.11 or higher you will first need to install XQuartz. XQuartz is the environment that R and R-Commander reside in on the Mac. If your OS is older than 10.11 you may already have XQuartz installed as part of the MacOS (but frankly you shouldn’t be running an OS that old). Go here:
Vuescan rutracker. After the package has downloaded, it will be in the lower left corner of your browser frame, you may click on it there or find it and click on it.
Just accept the defaults.
Agree to the license terms.
Then click “Install”.
Like all mac apps you will have to put in your MAC username and password. That is probably DIFFERENT than your VUNetID and ePassword.
It will take a while for the scripts to run and complete the install. Be patient; that “less than a minute” comment is not very serious.
You will be notified that the installation was successful.
Once you are told that, you will not need to install this again on this computer. You may be asked if you want to delete the installer pkg file. You may do so if you need the space. That will have no impact on the installed application, XQuartz.
Installing R
Slot machine algorithm. After successfully installing XQuartz, you will now go here and install R: (copy the URL below and paste into Chrome)
Click the download “R for (Mac) OS X”
Click the .pkg file circled below to download the file. The link to it will be placed in the lower left of your browser frame.
Click on the downloaded file in the lower left of the browser frame (in Chrome) and start the installation process. Just accept the defaults.
Click Continue
Click Continue
Agree to the license agreement.
Run the Install.
Again, put in your Apple username and password and click “Install Software”.
It will take a while to run the scripts so be patient. That one minute comment below is not to be taken very seriously. https://hoxi-win-free-bet-voip-big-cheat.peatix.com.
You will be notified when the installation is successful. Click “Close”.
Rmtca Mac Os Update
Installing R-Commander
Now we will launch R and from within R will install R-Commander. Go to your applications folder and Find R. The icon looks like this:
Rmtca Mac Os Catalina
Notice the caret prompt that looks like a greater than sign. “>”
At the prompt, type in (with NO spaces and all in lower case) install.packages()
You may copy/paste it from here.
You will now be asked to select a mirror site to download the package from.
Click in the window and scroll down (it helps if you have a mouse as opposed to the computer’s trackpad) to USA (CA 1) [https]. This is the Berkeley site and is generally the most current.
Now you will be given a list of packages you can install. There are literally hundreds of them. Scrolling here again works much better with an actual computer mouse.
Look for Rcmdr. There will be a number of Rcmdr plug-ins that follow but you are only interested in the first one. Select it and click “OK”.
Rmtca Mac Os X
You will see a lot downloaded the first time. It may take considerable time for this process to complete. When it is done you will see the caret prompt.
R-Commander has been downloaded and installed. You may be prompted to install additional packages that may not have come down in the most recent package. Go ahead and do that if asked.
Starting R-Commander
At the prompt type in: library(Rcmdr) with no spaces. You may copy/paste from here. You will do this EVERY TIME you launch the application. The first time though, it may tell you that you need to download some required packages. Accept the defaults and download those packages. After those packages are downloaded and installed the first time, you will not be asked again to do so.
To launch R-Commander, first click on R in your applications menu, then from the caret prompt type in library(Rcmdr)
When you see this screen you are ready to run your statistics.
This concludes the installation of R-Commander. You will only have to repeat this process if you want to install all of this on a different computer.
Links on R-Commander
Here are some links to pdf files that explain how to use R-Commander Treasure island slots.
JSG:031618
Related Articles
- Recording an Outbound Call from your Skype for Business Account
- Installing R and R-Commander on WINDOWS
- Installing R and R-Commander on the MacOS 10.11 and newer
- Installing R and R-Commander on WINDOWS
RMTCA Mac OS